Inlet hoses for washing machines and dishwashers

Inlet hoses for washing machines and dishwashers from the manufacturer SantehPlast. 

The inlet hose for washing machines and dishwashers allows you to direct water to the equipment. The product is used to connect the washing machine from the water pipe to a special tap. The latter can be closed if necessary. The safety of personal and neighborhood repairs depends on the reliability of the rubber part. If the hose bursts during operation of the equipment, then all the water will be in the room, which will result in unforeseen waste. 

SantehPlast products are of high quality, durability and long service life. The inlet hose of the washing machine is certified according to international quality standards UNI, ISO, DIN, NF and sanitary standards DSTU B V.2.5-14-98. All certificates are available. We work for export. 

Features of the release of SantehPlast inlet hoses. 

Our products are durable, flexible, do not break. The material is high quality rubber, withstands high temperatures and does not crack. No limestone deposits or other types of deposits form on the inside of the part. In the catalog you will find hoses for filling water into the machine of different lengths. 

Let's highlight the following technical characteristics of the water inlet hose for the SantehPlast washing machine: 

Made of EPDM rubber. 

Length from 1 to 5 meters. 

Working pressure at a maximum of 20 bar. 

Withstands a temperature range from +5 to +93 degrees. 

To prevent leaks at the joints, we reinforced the zones with metal sleeves with collar nuts for mounting. They are made of stainless steel, which indicates the wear resistance of the parts.You can connect the inlet hose for the dishwasher yourself manually, without the use of special tools. 

How to choose a product? 

Before placing an order for the inlet hose for a washing machine on our website, consider the following factors: {{1 }} Working pressure limits. Do not use a product below 20 bar, otherwise the hose will not last long. In private houses, the water supply system is more complex, so it is better to choose an element with a higher working pressure. 

Length. Inlet hoses for washing machines will not withstand stretches and kinks. Take exactly as much as you need for work. Should not be taken with a margin. This is unaesthetic, it will not be possible to remove the excess, since the radius of the hose bend is at least 50 cm. The optimal dimensions of the product will allow you to save on purchase (more length = higher cost) + you will not need to adjust the length during installation. 

Temperature. A more durable inlet hose for washing machines can withstand up to 100 ° C, other models - no higher than 90 ° C. Depending on the functionality, a model capable of operating at such high first rates may not be needed when operating household appliances. 

It is advisable to trust specialists to install the inlet hose on the washing machine if you are not confident in your abilities. Correct installation is the key to maintaining the product warranty, functionality and safety of the equipment, which should not be neglected. 

In the catalog of our SantehPlast store you can buy a standard type washing machine inlet hose that is suitable for any washing machine and dishwasher.More information about the product can be obtained from our consultants. We invite dealers to mutually beneficial cooperation. Communication can be done by email, phone or through the feedback form.